What Should Be Paid Attention To When Using The Touch Switch

Light touch switch, also known as button switch, first appeared in Japan. It is called a sensitive switch. When using, press the operating direction of the switch to meet the conditions of operating force. The function of the switch is to close and connect. When the pressure is cancelled, the switch opens. Its internal structure is realized by the force change of the metal spring. The light touch switch is composed of insert, base, spring plate, button and cover plate.

Precautions for using the touch switch:

1. When welding the switch terminals, do not apply excessive force load to the terminals to avoid the possibility of looseness, deformation and reduction of electrical characteristics. During welding, it is also important not to connect various circuit switches wrongly, so as to avoid fault or short circuit caused by wrong connection.

2. After touching the switch for several times, it should be noted that each welding part can be operated only after it is restored to normal temperature. If heating continues, touching the switch terminals may deform or damage them.

3. If you touch the switch for a long time, there will be a lot of dust and debris inside. Generally, the switch cannot be cleaned with water to avoid failure of the switch element due to moisture. Therefore, it should be wiped with a cotton cloth dipped in alcohol.

4. Avoid touching the switch with wet hands

5. When using, press the middle position of the switch as far as possible to avoid damaging the components.

6. Secondly, for the installation of the contact switch, please weld at the contact position. If welding is carried out with the midpoint of the switch pin fixed, the position of the pin may cause deformation.

The manufacturer of button switch tells you that the touch switch is commonly used for communication, remote control, data processing and anti-theft automatic alarm system. It is installed on the switch base with multiple code disks, and uses the location and routing of code disks to output different codes to control the switches of corresponding equipment. The manufacturer of the button switch said that the light touch switch is widely used. In order to prolong the service life of the light touch switch, it needs to be maintained.

1. The manufacturer of the button switch reminds you not to use it in the place where gas is generated: ammonia, sulfur dioxide, etc., because it is not drip proof, do not use it in the place where water or oil drips, and do not operate it with hands stained with water or oil. Especially in dusty places, please set dust cover to improve dust prevention performance.

2. The manufacturer of the button switch reminds you not to store it in a high temperature environment when selecting the storage location, because it is easy to cause oxidation reaction at the terminal, which will lead to welding failure. High temperature and humidity environment shall be avoided. Do not touch the charging parts when they are powered on. Do not connect multiple power supplies to one touch switch. This will cause circuit faults and short circuits.

3. The manufacturer of the button switch reminds you that if you want to modify the value setting, do not use wet fingers or oil on your hands, or operate the button when there are foreign matters. Alcohol is recommended if surface dirt, such as molded resin housings, is to be removed. But please be careful not to let alcohol penetrate.