Precautions For The Use Of Micro Switches

(1) When fixing the switch body, use M2 screws to fix it on a smooth surface with a torque of 0.098N·m or less. In addition, in order to prevent the screws from loosening, it is recommended to use washers at the same time.

(2) Please note that the action body should not directly exert force on the button or exciter in the free state, and exert force on the button in the vertical direction when using it.

(3) The operation setting after operation is based on 70[%] or more of the O.T. value. In the case of a switch, do not set the operating body at the operating limit position, so as to avoid opening and closing and over-travel caused by impact and shorten the life.

(4) In the case of hand soldering, please use an electric temperature of 320°C with temperature adjustment to complete the work within 3 seconds, and be careful not to apply force to the terminal during work.

(5) When using under small current and voltage, it is recommended to use low-power circuit type (Au-clad contact).